SMOK RSBT View larger


New product

In Stock

0/5 - 0 reviews

Add review


$31.50 per Each

More info

Introducing the SMOKtech RSBT Hybrid. RSBT stands for Rebuildable Stainless Bottom-coil Tank. Shipped with pre-installed 1.7ohm (+/- .2ohm) Single Coil. Extra parts packet including wick, wire, screws, spings, o-ring. This is likened to the Kayfun with its domed chimney enclosure over your coil/wick build

From SMOKtech:
  • RSBT is not a simple knockoff. It's a greatly improved Rebuildable Stainless Air controlable Bottom Coil Tank.
  • The isolation ring at bottom makes it a perfect model for rba beginners. SS mesh wick, cotton wick and silica wick are all available on this device.
  • Comes with a luxury pyrex & stainless glass drip tip, and a lot of spare parts for all the set up.
  • It's a brother of RSST.
  • Performs best when you max the air control and do a deep lung inhale.
  • 28-32awg kanthal wire is recommended.
  • You can also do a mirco coil for this tank if you have those skills
  • Remember to use IMR batteries of large amps which is really important while doing a mirco coil (for safety purposes).

  • This unit has a nice air flow control ring at the base that is easy to twist but stays in place. It has 5 airholes so you can dial in a wide range of air flow to your taste.
  • It is all stainless except of course for the 4ml Pyrex tank that is protected with an outer brushed stainless cover that is windowed.
  • The build deck is fairly simple. Coil your wick with leads for the positive and negative posts. Insert and use the thumbscrews to secure the wiring. Trim the wick to desired length into the well. SMOK pre-coils and wicks this with just a smidegen leading out of the channels into the glass tank.
  • This unit provides a Philips head adjustable battery contact that can be adjusted perfectly for your battery or mod.
  • Fill port located at the top with a Philips head screw securing the tank that must be unscrewed to fill the tank.
  • Comes with a luxury thick Pyurex drip tip with a stainless steel collar. This can be replaced with most any other 510 drip tips.
  • Comes with a spare parts package that includes wire, wick, O-rings, screws, springs and a mini Philips screw driver.
  • Dimensions: 48mm high; 22mm wide; 26mm high Pyrex tip


Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review

Questions (0)

No customer questions for the moment.

Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
  Ask a question